Liberator Flip Ramp: Flip Positions and Everyday Storage
By Pure Pleasure Shop | Sex Toys, Lube & Shameless Sex | Published: 2026-11-02
Category: How-to Guides
Learn how to flip the Liberator Flip Ramp for different positions and store it discreetly as an ottoman. A practical positioning guide for couples.
Quick answer
To get the most from the Liberator Flip Ramp, treat it as two tools in one: flip it to the angle that matches your position, then flip it back to ottoman mode for everyday storage. Always check stability and comfort before adding weight or movement.
Why the flip matters for positioning
The Liberator Flip Ramp is designed as a rocking pedestal for standing or from-behind sex, and its ottoman shape lets it blend into the bedroom. Flipping changes the angle and height, so the same cushion supports different positions without extra furniture. Because it is a positioning pillow for couples, the goal is to bring bodies into alignment rather than force a pose. Start with the lower angle if you are unsure; you can always flip to a steeper setting once you know how your bodies fit.
Stability and surface checks before you flip
A supportive sex cushion only works if it stays put. Before any flip, clear the floor of rugs that slide, toys, or clothing. The Flip Ramp has a rocking shape, so test it empty first: press down on each end and listen for wobble. If it rocks too freely on a hard floor, move to carpet or place a non-slip mat underneath. Never flip the ramp while someone is leaning on it; set the angle first, then invite your partner to position themselves.
When the Flip Ramp is not the right choice
This piece is bulky compared with a small wedge, and its ottoman disguise means it takes up floor space even when stored. If you have limited room or need something you can tuck into a drawer, a smaller positioning pillow may suit you better. Also, the Flip Ramp is not a medical device and has no weight rating listed in the catalog, so use common sense and keep both feet grounded during standing positions. If either partner has balance concerns, choose floor-based positions instead.
Step-by-step: flip, position, and store
- Clear and check the floor: Remove loose rugs, clothing, and toys from the area. Place the Flip Ramp on a stable surface and press down on each end to test for wobble before anyone climbs on. A ramp that rocks freely on a hard floor can shift mid-position; move to carpet or add a non-slip mat first.
- Flip to the angle that matches your position: Decide whether you want the lower or higher incline. With the ramp empty, lift one end and rotate it until the desired side is up. Lock it in place by setting it down firmly. Never flip the ramp while a partner is leaning on it; set the angle first, then invite them to position themselves.
- Position the receiving partner first: Have the person being supported sit, kneel, or lean against the ramp before the other partner adds weight. Adjust until hips and shoulders feel aligned, not twisted. If the receiving partner feels pressure points or has to tense to stay in place, the angle is wrong; flip to the other side or add a pillow.
- Add the active partner slowly: The active partner should approach from the side or behind and use the ramp's edge for leverage, not to pull the other person off balance. Start with slow movement to confirm the ramp stays stable. Stop immediately if the ramp starts to slide or rock excessively; reposition on a more stable surface.
- Flip back to ottoman mode for storage: When finished, remove any accessories, wipe the surface if needed, and flip the ramp back to its ottoman shape. Store it in a dry, ventilated spot away from direct sunlight. Avoid storing heavy items on top of the ramp, as that can compress the cushion over time.
Product facts
- Liberator Flip Ramp: The Liberator Flip Ramp is shaped like a classic ottoman and doubles as a rocking pedestal for standing or from-behind sex. That dual design means you can leave it out as furniture and still flip it into position when you want support.
Liberator Flip Ramp
